This page (revision-30) was last changed on 2020-07-17 09:18 by Murray Altheim

This page was created on 2019-12-23 06:53 by Murray Altheim

Only authorized users are allowed to rename pages.

Only authorized users are allowed to delete pages.

Page revision history

Version Date Modified Size Author Changes ... Change note
30 2020-07-17 09:18 9 KB Murray Altheim to previous
29 2020-05-09 22:45 8 KB Murray Altheim to previous | to last
28 2020-05-09 22:26 8 KB Murray Altheim to previous | to last
27 2020-05-09 22:26 8 KB Murray Altheim to previous | to last
26 2020-05-09 22:25 8 KB Murray Altheim to previous | to last
25 2020-05-09 22:25 8 KB Murray Altheim to previous | to last
24 2020-01-02 09:06 8 KB Murray Altheim to previous | to last
23 2020-01-02 09:02 8 KB Murray Altheim to previous | to last
22 2020-01-02 08:59 7 KB Murray Altheim to previous | to last
21 2020-01-02 08:55 7 KB Murray Altheim to previous | to last

Page References

Incoming links Outgoing links
SR 04
SR04

Version management

Difference between version and

At line 2 changed one line
It was David's fourth robot (hence the "04"), and was built sometime around 1998.
It was David's fourth robot (hence the "04"), and was built somewhere around 1998.
At line 4 changed 2 lines
David has also suggested to me a [Build Sequence|BuildSequence] which is a pretty good action plan for anyone building robots. As someone who's had a bit of trouble focusing on getting my
robot going (there's just sooo much to learn!), his advice is greatly appreciated.
From David's description:
%%blockquote
__SR04__ is a small mobile robot suitable for exploring human habitats unattended.
It is controlled by a Motorola HC6811 microprocessor running in an M.I.T. 6.270 CPU card, similar to the commercially available "Handy Board." Two 12-volt DC gear-head motors maneuver the robot in a dual-differential drive configuration, balanced by a non-driven tail wheel caster and powered by a 12 volt 2.2 amp-hour sealed lead acid battery. Sensory input is provided by (in order of priority): front bumper switches, IR collision avoidance, stereo sonar ranging, photo detectors, passive IR motion detection, and shaft-encoder odometry.
%%
At line 7 changed one line
See also the links at bottom of this page.
!! Design
At line 10 changed one line
~[The following includes text and images from David Anderson's web site; kindly used with permission.]
~[The following text and images are from David Anderson's web site, used with permission.]
At line 12 removed one line
----
At line 14 changed one line
!! Description:
[{Image src='attach/SR04/sr04-front-49-thumb.jpg' link='attach/SR04/sr04-front-49.jpg' caption='SR04 Front View (image used with permission)' align='right' class='imgFloatRight' }]
At line 16 removed 17 lines
[{Image src='attach/SR04/sr04-oblique-36.jpg' caption='David Anderson’s SR04 Robot' width='500' align='right' class='imgFloatRight'}]
__SR04__ is a small mobile robot suitable for exploring human habitats unattended.
It is controlled by a [Motorola HC6811 microprocessor|https://en.wikipedia.org/wiki/Motorola_68HC11] running in an [M.I.T. 6.270 CPU card|http://web.csulb.edu/~wmartinz/rssc/content/MS_11.html], similar to the commercially available "Handy Board." Two 12-volt DC gear-head motors maneuver the robot in a dual-differential drive configuration, balanced by a non-driven tail wheel caster and powered by a 12 volt 2.2 amp-hour sealed lead acid battery. Sensory input is provided by (in order of priority): front bumper switches, IR collision avoidance, stereo sonar ranging, photo detectors, passive IR motion detection, and shaft-encoder odometry.
The SR04 was conceived around the following very loose design criteria:
# Survive in a wide range of (cluttered) human environments autonomously and continuously, without getting stuck.
# Provide a robust and reliable platform for developing navigation and behavior software.
# Be entertaining and aesthetic for the local human population.
!! Design
[{Image src='attach/SR04/sr04-geometry.jpg' caption='SR04 Geometry' align='right' class='imgFloatRight' }]
At line 39 changed 3 lines
The robot controller is a Motorola HC6811 microprocessor running in an M.I.T. 6.270 board. This card was developed for the introductory robotics course taught at M.I.T. It provides the HC6811 processor with 32k of battery-backed RAM, 32 eight-bit A/D channels, hardware 40kHz IR , 6 one-amp H-Bridge (L293) motor driver channels, an LCD readout, and some digital I/O ports for timer and output compare functions useful to robot builder-types.
The robot controller is a Motorola HC6811 microprocessor running in an M.I.T. 6.270 board. This card was developed for the introductory robotics course taught at M.I.T. It provides the HC6811 processor with 32k of battery-backed RAM, 32 eight-bit A/D channels, hardware 40khz IR , 6 one-amp H-Bridge (L293) motor driver channels, an LCD readout, and some digital I/O ports for timer and output compare functions useful to robot builder-types.
At line 44 removed 2 lines
[{Image src='attach/SR04/sr04-front-49-thumb.jpg' link='attach/SR04/sr04-front-49.jpg' caption='SR04 Front View (click to enlarge)' align='right' class='imgFloatRight' }]
At line 44 added one line
 
At line 64 removed one line
!! Subsystems
At line 66 removed 33 lines
! A. PID Controller
A [Proportional Integral Derivative (PID) algorithm|PIDController] is used to control the main drive motors and maneuver the robot. This useful and subtle control method consists of three subsystems:
# __Shaft encoders__: Optical encoders attached directly to the motor shafts are used to accurately measure the speed of the motors (and by inference, the position of the robot).
# __Pulse Width Modulation__: Hardware timer interrupt generators in the HC6811 chip are used to generate two PWM sign \\ als that control the two L293 H-Bridges, which drive the main motors.
# __PID__: The PID algorithm itself runs in the 20 Hz sensor loop. It samples the shaft encoder variables to determine the current motor speeds, compares these to the requested motor speeds, and adjusts the PWM values up or down to get sampled and requested values to match.
The inputs to the PID control sub-system are the global variables, __velocity__, and __rotation__. Velocity is a signed value that represents the speed at the center of the robot, and rotation is a signed value that represents the difference in velocity between the two wheels. The PID controller reads these values, calculates the proper encoder counts per second for each wheel, and attempts to slew the motors toward the requested values, 20 times per second.
This method of closed loop control has a number of advantages. The velocity of the robot becomes independent of battery voltage, as the PID controller will increase the pulse width to make up for the sagging supply. It is also independent of load, so the robot can move very slowly and still climb over objects and maintain constant speed on an incline. The ability to control the wheels smoothly over a wide speed range translates into the ability to precisely maneuver the robot. The PID controller also provides stability for dead-reckoning algorithms.
! B. Odometry
The encoder counts returned from the [optical shaft encoders|MotorEncoder] mounted on the drive [motors] are also used to track the position of the robot relative to its position when last reset. These are maintained as a set of global variables that are updated at the 20 Hz sensor loop rate.
__X_position__ and __Y_position__ are the Cartesian co-ordinates in inches, and __Theta __is the rotation of the 'bot around its center in degrees. These data provide the "sensor input" for the dead-reckoning behaviors.
! C. Telemetry
A pair of "Lynx" radio tx/rcv modules is used to implement a telemetry back channel. The robot transmits a continuous stream of 80 character ASCII packets at 2400 baud. These consist of odometer and sensor data, battery voltage, state flags, and so forth. These are received and piped directly to the computer screen, or tee'd off to a file for later perusal. The transmitter on the robot draws only about 10 ma and is useful out to around 50 feet, depending on the space.
%%blockquote
Lately I have added a mode that allows the 'bot to wander freely about a space for three minutes, and then sound an alarm and try to dead-reckon back to the origin. This becomes very interesting if the path back to the origin has been blocked. I have seen the robot actually leave the room, go around the house, re-enter through a different doorway and finally back to the origin. — David Anderson
%%
%%small
~[Further descriptions of the SR04's sensors and behaviours are available from David Anderson's [SR04|http://www.geology.smu.edu/~dpa-www/robots/sr04/sr04.html] web page.]
%%
----
At line 105 removed 6 lines
* [IMU Odometry|http://geology.heroy.smu.edu/dpa-www/robo/Encoder/imu_odo/]: Tracking the robot's position in X,Y,theta with wheel encoders and wheel encoders plus gyroscope. Section II.B details the classical odometry algorithm for a two wheel differentially driven platform:
* [The DPRG Outdoor Challenges: Navigation|http://www.geology.smu.edu/~dpa-www/robots/dprg/outdoor]: Navigating to a waypoint target using the robot's location as collected by odometry as described in the previous paper
* [Math Routines for the DPRG Outdoor Robot Challenge|http://www.geology.smu.edu/dpa-www/robo/challenge/math.html]
This page (revision-30) was last changed on 2020-07-17 09:18 by Murray AltheimTop