This page (revision-25) was last changed on 2021-04-29 05:29 by Murray Altheim

This page was created on 2019-12-28 07:38 by unknown

Only authorized users are allowed to rename pages.

Only authorized users are allowed to delete pages.

Page revision history

Version Date Modified Size Author Changes ... Change note
25 2021-04-29 05:29 11 KB Murray Altheim to previous
24 2021-04-29 05:22 11 KB Murray Altheim to previous | to last
23 2020-05-01 08:39 11 KB Murray Altheim to previous | to last
22 2020-02-08 05:45 10 KB Murray Altheim to previous | to last
21 2020-02-08 00:34 9 KB Murray Altheim to previous | to last

Page References

Incoming links Outgoing links
KRZ 01
KRZ01

Version management

Difference between version and

At line 5 changed one line
''You can also see the [NZPRG blog entry on the KRZ01|https://robots.org.nz/2020/02/07/krz-01/] and a [motor test video|https://youtu.be/VdvCCPvwDmE] on the [NZPRG YouTube Channel|https://www.youtube.com/channel/UCY3HPoPv-t_1HiRurWfgUOA].''
''(You can also see the [NZPRG blog entry on the KRZ01|https://robots.org.nz/2020/02/07/krz-01/] and a [motor test video|https://youtu.be/VdvCCPvwDmE] on the [NZPRG YouTube Channel|https://www.youtube.com/channel/UCY3HPoPv-t_1HiRurWfgUOA])''
At line 9 removed 3 lines
Note that the KRZ01 has been superceded by the __[KRZ02]__, a Mechanum-wheeled robot. Its Raspberry Pi Zero W, Mini Black Hat Hack3r, and Picon Zero motor controller were used.
At line 14 changed one line
[{Image src='attach/KRZ01/krz01-top-thumb.jpg' link='attach/KRZ01/krz01-top.jpg' caption='Breakout Board and Motor Controller (click to enlarge)' align='right' class='imgFloatRight'}]
[{Image src='attach/KRZ01/krz01-top-thumb.jpg' link='attach/KRZ01/krz01-top.jpg' caption='top view showing breakout board and motor controller' align='right' class='imgFloatRight'}]
At line 29 changed 4 lines
%%(max-width: 800px)
| [{Image src='attach/KRZ01/krz01-side-thumb.jpg' link='attach/KRZ01/krz01-side.jpg' caption='Side View (click to enlarge)' align='left' class='imgFloatLeft'}] | [{Image src='attach/KRZ01/krz01-front-thumb.jpg' link='attach/KRZ01/krz01-front.jpg' caption='Front View (click to enlarge)' align='right' class='imgFloatRight'}]
| [{Image src='attach/KRZ01/krz01-iso2-thumb.jpg' link='attach/KRZ01/krz01-iso2.jpg' caption='Overall View (click to enlarge)' align='left' class='imgFloatLeft'}] | [{Image src='attach/KRZ01/krz01-bottom-thumb.jpg' link='attach/KRZ01/krz01-bottom.jpg' caption='Bottom View (click to enlarge)' align='right' class='imgFloatRight'}]
%%
| [{Image src='attach/KRZ01/krz01-side-thumb.jpg' link='attach/KRZ01/krz01-side.jpg' caption='side view (click to enlarge)' align='left' class='imgFloatLeft'}] | [{Image src='attach/KRZ01/krz01-front-thumb.jpg' link='attach/KRZ01/krz01-front.jpg' caption='front view (click to enlarge)' align='right' class='imgFloatRight'}]
| [{Image src='attach/KRZ01/krz01-bottom-thumb.jpg' link='attach/KRZ01/krz01-bottom.jpg' caption='bottom view (click to enlarge)' align='left' class='imgFloatLeft'}] | [{Image src='attach/KRZ01/krz01-iso2-thumb.jpg' link='attach/KRZ01/krz01-iso2.jpg' caption='iso view (click to enlarge)' align='right' class='imgFloatRight'}]
At line 48 added one line
[{Image src='attach/KRZ01/krz01-templates-thumb.jpg' link='attach/KRZ01/krz01-templates.jpg' caption='plastic templates (click to enlarge)' align='right' class='imgFloatRight'}]
At line 56 changed one line
* [I²C|I2C] interface, leaving all GPIO pins free for your own use*
* I2C interface, leaving all GPIO pins free for your own use*
At line 73 removed 3 lines
This is the base price of the robot without the servo or VL53L1X Time of Flight (ToF) Sensor.
At line 79 changed 14 lines
| 2x | [Micro Gear Motor (Extended back shaft) - 298:1|https://shop.pimoroni.com/products/micro-metal-gearmotor-extended-back-shaft?variant=3073681089] | £5.10 | NZ$20 | Pimoroni |
| 1x | [Magnetic Encoder Pair Kit|https://shop.pimoroni.com/products/magnetic-encoder-pair-kit-for-micro-metal-gearmotors-12-cpr-2-7-18v-hpcb-compatible] | £9 | NZ$18 | Pimoroni |
| 1x | [Micro Metal Gearmotor Bracket (Pair)|https://shop.pimoroni.com/products/pimoroni-gearmotor-bracket-pair] | £3.90 | NZ$16 | Pimoroni |
| 1x | [Moon Buggy Wheels - Pair|https://shop.pimoroni.com/products/moon-buggy-wheels-pair] | £4.50 | NZ$9 | Pimoroni |
| 1x | [Mini Black HAT Hack3r – PCB only|https://shop.pimoroni.com/products/mini-black-hat-hack3r?variant=19448026119] | £4.50 | NZ$9 | Pimoroni |
| 2x | [Male 40-pin 2x20 HAT Header|https://shop.pimoroni.com/products/male-40-pin-2x20-hat-header?variant=10476117383] | £1 | NZ$2 | Pimoroni |
| 1x | [2x20 pin Female GPIO Header for Raspberry Pi - 11mm|https://shop.pimoroni.com/products/2x20-pin-gpio-header-for-raspberry-pi-2-b-a?variant=1132812269] | £2.10 | NZ$8.50 | Pimoroni |
| 1x | [Breakout Garden Mini (I2C)|https://shop.pimoroni.com/products/breakout-garden-mini-i2c] | £9.60 | NZ$19 | Pimoroni |
| 3x | [Sharp GP2Y0D810Z0F Digital Distance Sensor 2-10cm|https://www.adafruit.com/product/1927] | US$7.95 | NZ$37 | Adafruit |
| 1x | 3mm Delrin chassis, nuts and bolts | - | NZ$20 | Adafruit |
|| Base Total | | || NZ$210.50 |
| 1x | [VL53L1X Time of Flight (ToF) Sensor|https://shop.pimoroni.com/products/vl53l1x-breakout] | £14.40 | NZ$29 | Pimoroni |
| 1x | [Micro servo|https://www.adafruit.com/product/169] | US$5.95 | NZ$9 | Adafruit |
|| Extras Total | | || NZ$248.50 |
| 2x | [Micro Gear Motor (Extended back shaft) - 298:1|https://shop.pimoroni.com/products/micro-metal-gearmotor-extended-back-shaft?variant=3073681089] | £5.10 | nz | Pimoroni |
| 1x | [Magnetic Encoder Pair Kit|https://shop.pimoroni.com/products/magnetic-encoder-pair-kit-for-micro-metal-gearmotors-12-cpr-2-7-18v-hpcb-compatible] | £9 | nz | Pimoroni |
| 1x | [Micro Metal Gearmotor Bracket (Pair)|https://shop.pimoroni.com/products/pimoroni-gearmotor-bracket-pair] | £3.90 | nz | Pimoroni |
| 1x | [Moon Buggy Wheels - Pair|https://shop.pimoroni.com/products/moon-buggy-wheels-pair] | £4.50 | nz | Pimoroni |
| 1x | [Mini Black HAT Hack3r – PCB only|https://shop.pimoroni.com/products/mini-black-hat-hack3r?variant=19448026119] | £4.50 | nz | Pimoroni |
| 2x | [Male 40-pin 2x20 HAT Header|https://shop.pimoroni.com/products/male-40-pin-2x20-hat-header?variant=10476117383] | £1 | nz | Pimoroni |
| 1x | [2x20 pin Female GPIO Header for Raspberry Pi - 11mm|https://shop.pimoroni.com/products/2x20-pin-gpio-header-for-raspberry-pi-2-b-a?variant=1132812269] | £2.10 | nz | Pimoroni |
| 1x | [Breakout Garden Mini (I2C)|https://shop.pimoroni.com/products/breakout-garden-mini-i2c] | £9.60 | nz | Pimoroni |
| 3x | [Sharp GP2Y0D810Z0F Digital Distance Sensor 2-10cm|https://www.adafruit.com/product/1927] | $7.95 | nz | Adafruit |
| 1x | i | e | nz | v |
|| Total | | || NZ$52 |
At line 98 removed 13 lines
!! Build
[{Image src='attach/KRZ01/krz01-templates-thumb.jpg' link='attach/KRZ01/krz01-templates.jpg' caption='plastic templates (click to enlarge)' align='right' class='imgFloatRight'}]
The chassis is made out of 3mm Delrin plastic, sourced from MacPlas in Auckland. The various components were laid out on paper taped to the plastic, which was then cut (using a sabre saw with an "extra clean" wood blade) and the holes drilled. Stainless, black nylon, and aluminium spacers were used for connecting the boards and mounting the circuit boards.
The trickiest part (by far) was soldering the ribbon cable to the tiny motor encoder board and then soldering that to the back of each motor, which themselves are extremely small, just 25mm long. It was pretty fiddly work, and getting the alignment of the board correct took a great deal of care and patience. A magnifier might come in handy. See the bottom view above.
If you don't plan to use the motor encoders, the motors are also available with an solderless connector, the [Micro Metal Gearmotor with Push Header Shim – 298:1|https://shop.pimoroni.com/products/micro-metal-gearmotor-with-motor-shim?variant=24169921671]. Using the motor encoders entails writing software to pay attention to the motor's rotation; this is called a [PID Controller].
Connections were made either with ribbon cable (soldered where necessary) or using header pins and "[jumper jerky|https://shop.pimoroni.com/products/jumper-jerky-junior?variant=1076482185]" solderless connections.
At line 114 changed one line
called the [PicoCon|https://shop.4tronix.co.uk/products/4tronix-picocon-motor-robot-controller-for-raspberry-pi-kit] which sells for £5. Strictly speaking, the servo and ToF distance sensor are not required, so that could be skipped. The three infrared sensors (which come in 5cm, 10cm and 15cm ranges) could be replaced with piano wire bumpers using [lever switches|https://www.jaycar.co.nz/spdt-125v-3a-sub-miniature-micro-switch-with-lever/p/SM1036] that would cost several dollars.
called the [PicoCon|https://shop.4tronix.co.uk/products/4tronix-picocon-motor-robot-controller-for-raspberry-pi-kit] which sells for £5.
At line 116 removed one line
At line 119 removed 3 lines
As this uses a Breakout Garden it's easy to change the sensors to different I²C [Breakout Garden|https://shop.pimoroni.com/collections/breakout-garden] boards. If the Mini Black HAT Hack3r (holding the Pi, motor controller and Breakout Garden Mini) were moved a bit aft, there might be enough at the front to mount a [Pixy2 camera|https://pixycam.com/]. It's yet not clear that a Raspberry Pi Zero has enough processing power to work effectively with a Pixy2, so this will likely be implemented on the KR01 instead. Otherwise there's room up front for a common Pi camera if the servo is left off (or mount the camera on the servo!)
At line 124 removed one line
This robot uses 47mm "Moon Buggy" wheels and ball casters. The fore caster is mounted a bit higher than the aft caster, so (hopefully) it won't snag on things. Absent a bumper this is a possibility. The robot is fine on wood floors and low-pile carpets, and can navigate between them without incident. There's a Kilim rug in the lounge (owned by the cat) that has a 15mm edge which has proved impossible for the robot to surmount. It just pushes up against that edge and spins its wheels.
At line 126 changed one line
This points out the fact that robot currently has no bumpers. I'm considering making a tiny version of the KR01's polycarbonate bumpers, or perhaps a pair of piano wire feelers. The robot is currently relying entirely on its infrared sensors. We'll see how this works out, but given it can hang up on the cat carpet perhaps a bumper is in order.
At line 128 removed one line
This was not a solderless project. As noted in the ''Build'' section, soldering ribbon cable to the motor encoder boards and then soldering them to the motors was quite tricky, not for the faint of heart. You can avoid this by avoiding the encoders and using the solderless version of the motors.
At line 130 removed one line
__1 May 2020 Update:__ the front ball caster seemed to get hung up sometimes when trying to transition from floor to carpet. David Anderson had cautioned against using a front caster in [his YouTube video|https://youtu.be/8CXReb7f0Eo], so this was hardly an unknown. Due to this issue the front caster has been removed, and the symmetry of the robot sacrificed a bit by moving the wheels forward about 1cm in order to set the balance aft. Even with this change of balance it's still possible for the robot to fall forward onto its nose. Some kind of curved skid to keep this from happening could be fitted, but currently the plan is to change this from a 2 wheeled to 4 Mecanum wheel robot, so no further changes to this design are expected.
At line 102 added one line
At line 136 changed one line
[{Tag KRZ01 Robot RobotPrototype}]
[{Tag Robot RobotPrototype}]
This page (revision-25) was last changed on 2021-04-29 05:29 by Murray AltheimTop