This page (revision-21) was last changed on 2021-11-21 04:33 by Murray Altheim

This page was created on 2019-12-26 08:51 by Murray Altheim

Only authorized users are allowed to rename pages.

Only authorized users are allowed to delete pages.

Page revision history

Version Date Modified Size Author Changes ... Change note
21 2021-11-21 04:33 6 KB Murray Altheim to previous

Page References

Incoming links Outgoing links
I 2 C
I2C

Version management

Difference between version and

At line 5 changed 4 lines
# __3-6V__ (Vcc)
# __SDA__ (Serial Data Line)
# __SCL__ (Serial Clock Line)
# __GND__ (Ground)
# __3-6V__ (Vcc, red)
# __SDA__ (Serial Data Line, blue)
# __SCL__ (Serial Clock Line, yellow)
# __GND__ (Ground, black)
At line 10 added 2 lines
The colors listed are those used by Adafruit with their line of STEMMA Qt connectors.
At line 36 changed 10 lines
|| Stock || Brand || Description || 7 bit address || Notes
| 1 | Pimoroni | [RGB Potentiometer|https://shop.pimoroni.com/products/rgb-potentiometer-breakout] | 0x0E ‡ | uses [Nuvoton MS51|NuvotonMS51]
| 1 | Pimoroni | [RGB Encoder|https://shop.pimoroni.com/products/rgb-encoder-breakout] | 0x0F ‡ | uses [Nuvoton MS51|NuvotonMS51]
| 2 | PiBorg | [Thunderborg|https://www.piborg.org/motor-control-1135/thunderborg] | 0x10 / 0x11 † | dual motor controller
| 0 | Adafruit | [VCNL4010 Proximity Sensor|https://www.adafruit.com/product/466] | 0x13 | infrared, 0-200mm range
| 1 | Pimoroni | [IO Expander|https://shop.pimoroni.com/products/io-expander] | 0x18 ‡ | uses [Nuvoton MS51|NuvotonMS51]
| 2 | Pimoroni | [LSM303D 6DoF Motion Sensor|https://shop.pimoroni.com/products/lsm303d-6dof-motion-sensor-breakout] | 0x1D / 0x1E † |
| 1 | Pimoroni | [LTR-559 Light & Proximity|https://shop.pimoroni.com/products/ltr-559-light-proximity-sensor-breakout] | 0x23 | light detection; 0-50mm range proximity detection
| 3 | Pimoroni | [VL53L1X Time of Flight|https://shop.pimoroni.com/products/vl53l1x-breakout] | 0x29 | range 40mm-4m; 0x29 conflicts with BNO055
| 1 | Adafruit | [BNO055 IMU Sensor|BNO055ImuSensor] | 0x28 / 0x29 † | 0x29 conflicts with VL531X
|| Stock || Brand || Description || 7 bit address || Notes
| 1 | Pimoroni | [RGB Potentiometer|https://shop.pimoroni.com/products/rgb-potentiometer-breakout] | 0x0E ‡ | uses [Nuvoton MS51|NuvotonMS51]
| 1 | Pimoroni | [RGB Encoder|https://shop.pimoroni.com/products/rgb-encoder-breakout] | 0x0F ‡ | uses [Nuvoton MS51|NuvotonMS51]
| 2 | PiBorg | [Thunderborg|https://www.piborg.org/motor-control-1135/thunderborg] | 0x10 / 0x11 † | dual motor controller
| 0 | Adafruit | [VCNL4010 Proximity Sensor|https://www.adafruit.com/product/466] | 0x13 | infrared, 0-200mm range
| 1 | Pimoroni | [IO Expander|https://shop.pimoroni.com/products/io-expander] | 0x18 ‡ | uses [Nuvoton MS51|NuvotonMS51]
| 2 | Pimoroni | [LSM303D 6DoF Motion Sensor|https://shop.pimoroni.com/products/lsm303d-6dof-motion-sensor-breakout] | 0x1D / 0x1E † |
| 1 | Adafruit | [BH1750 Light Sensor|https://www.adafruit.com/product/4681] | 0x23 / 0x5C | 16-bit Ambient Light Sensor
| 1 | Pimoroni | [LTR-559 Light & Proximity|https://shop.pimoroni.com/products/ltr-559-light-proximity-sensor-breakout] | 0x23 | light detection; 0-50mm range proximity detection
| 3 | Pimoroni | [VL53L1X Time of Flight|https://shop.pimoroni.com/products/vl53l1x-breakout] | 0x29 | range 40mm-4m; 0x29 conflicts with BNO055
| 1 | Adafruit | [BNO055 IMU Sensor|BNO055ImuSensor] | 0x28 / 0x29 † | 0x29 conflicts with VL531X
At line 48 changed 4 lines
| 1 | PiBorg | [Ultraborg|https://www.piborg.org/sensors-1136/ultraborg] | 0x36 |
| 2 | Pimoroni | [HT0740 10A Switch|https://shop.pimoroni.com/products/ht0740-breakout] | 0x38 / 0x39 † |
| 1 | Adafruit | [INA260 Current Sensor|https://www.adafruit.com/product/4226] | 0x40 / 0x41 / 0x44 / 0x45 † | up to 4 devices via 2 jumpers
| 2 | Pimoroni | [ADS1015 +/-24V ADC 3 Channel|Ads1015AnalogDigitalConverter] | 0x48 / 0x49 † |
| 1 | PiBorg | [Ultraborg|https://www.piborg.org/sensors-1136/ultraborg] | 0x36 |
| 2 | Pimoroni | [HT0740 10A Switch|https://shop.pimoroni.com/products/ht0740-breakout] | 0x38 / 0x39 † |
| 1 | Adafruit | [INA260 Current Sensor|https://www.adafruit.com/product/4226] | 0x40 / 0x41 / 0x44 / 0x45 † | up to 4 devices via 2 jumpers
| 2 | Pimoroni | [ADS1015 +/-24V ADC 3 Channel|Ads1015AnalogDigitalConverter] | 0x48 / 0x49 † |
At line 56 added one line
| 1 | Adafruit | [9-DOF Orientation IMU Fusion Breakout - BNO085 (BNO080)|https://www.adafruit.com/product/4754] | 0x4A |
At line 57 changed one line
| 1 | Pimoroni | [AS7262 6-channel Spectral Sensor (Spectrometer)|https://shop.pimoroni.com/products/as7262-6-channel-spectral-sensor-spectrometer-breakout] | 0x49 | 6 spectral channels (450, 500, 550, 570, 600, 650nm)
| 1 | Pimoroni | [AS7262 6-channel Spectral Sensor (Spectrometer)|https://shop.pimoroni.com/products/as7262-6-channel-spectral-sensor-spectrometer-breakout] | 0x49 | 6 spectral channels (450, 500, 550, 570, 600, 650nm)
At line 59 removed one line
This page (revision-21) was last changed on 2021-11-21 04:33 by Murray AltheimTop