This page (revision-21) was last changed on 2021-11-21 04:33 by Murray Altheim

This page was created on 2019-12-26 08:51 by Murray Altheim

Only authorized users are allowed to rename pages.

Only authorized users are allowed to delete pages.

Page revision history

Version Date Modified Size Author Changes ... Change note
21 2021-11-21 04:33 6 KB Murray Altheim to previous

Page References

Incoming links Outgoing links
I 2 C
I2C

Version management

Difference between version and

At line 37 changed 2 lines
| 1 | Pimoroni | LTR-559 Light & Proximity | 0x23 |
| 3 | Pimoroni | VL53L1X Time of Flight (ToF) | 0x29 | range 40mm-4m
| 1 | Pimoroni | [RGB Potentiometer|https://shop.pimoroni.com/products/rgb-potentiometer-breakout] | 0x0E ‡ | uses [Nuvoton MS51|NuvotonMS51]
| 1 | Pimoroni | [RGB Encoder|https://shop.pimoroni.com/products/rgb-encoder-breakout] | 0x0F ‡ | uses [Nuvoton MS51|NuvotonMS51]
| 1 | Pimoroni | [IO Expander|https://shop.pimoroni.com/products/io-expander] | 0x18 ‡ | uses [Nuvoton MS51|NuvotonMS51]
| 2 | Pimoroni | [LSM303D 6DoF Motion Sensor|https://shop.pimoroni.com/products/lsm303d-6dof-motion-sensor-breakout] | 0x1D / 0x1E † |
| 1 | Pimoroni | [LTR-559 Light & Proximity|https://shop.pimoroni.com/products/ltr-559-light-proximity-sensor-breakout] | 0x23 |
| 3 | Pimoroni | [VL53L1X Time of Flight|https://shop.pimoroni.com/products/vl53l1x-breakout] | 0x29 | range 40mm-4m
At line 40 changed 8 lines
| 2 | Adafruit | HT0740 Big Damn Switch 10A | 0x38 / 0x39 |
| 1 | Adafruit | INA260 Current Sensor | 0x40 (jumper selectable) |
| 2 | Pimoroni | 11x7 LED Matrix #1 | 0x75 |
| 2 | Pimoroni | 11x7 LED Matrix #2 | 0x77 |
| 4 | Pimoroni | 5x5 RGB Matrix | 0x74 / 0x77 | 77 will be in conflict with 11x7 #2
| 2 | Pimoroni | [ADS1015 +/-24V ADC 3 Channel|Ads1015AnalogDigitalConverter] | 0x48 / 0x49 |
| 2 | Adafruit | ADS1015 12 bit ADC 4 Channel w Prog Gain | 0x48 - 0x4B (jumpers) |
| 2 | PiBorg | Thunderborg | 0x10 / 0x11 |
| 2 | Adafruit | [HT0740 10A Switch|https://shop.pimoroni.com/products/ht0740-breakout] | 0x38 / 0x39 † |
| 1 | Adafruit | INA260 Current Sensor | 0x40 † |
| 2 | Pimoroni | [11x7 LED Matrix|https://shop.pimoroni.com/products/11x7-led-matrix-breakout] | 0x75 / 0x77 † | 77 will be in conflict with 5x5
| 4 | Pimoroni | [5x5 RGB Matrix|https://shop.pimoroni.com/products/5x5-rgb-matrix-breakout] | 0x74 / 0x77 † | 77 will be in conflict with 11x7
| 2 | Pimoroni | [ADS1015 +/-24V ADC 3 Channel|Ads1015AnalogDigitalConverter] | 0x48 / 0x49 † |
| 2 | Adafruit | ADS1015 12 bit ADC 4 Channel w Prog Gain | 0x48 - 0x4B † |
| 2 | PiBorg | Thunderborg | 0x10 / 0x11 † |
At line 49 changed one line
| 1 | Pimoroni | ICM20948 9-DOF Motion Sensor | 0x68 / 0x69 |
| 1 | Pimoroni | [ICM20948 9-DOF Motion Sensor|https://shop.pimoroni.com/products/icm20948] | 0x68 / 0x69 † |
At line 57 added one line
| 1 | Pimoroni | [AS7262 6-channel Spectral Sensor (Spectrometer)|https://shop.pimoroni.com/products/as7262-6-channel-spectral-sensor-spectrometer-breakout] | 0x49 | 6 spectral channels (450, 500, 550, 570, 600, 650nm)
At line 59 added 4 lines
† jumper selectable
‡ software configurable
This page (revision-21) was last changed on 2021-11-21 04:33 by Murray AltheimTop