This page contains some miscellaneous notes about wiring on the KR01 robot.
Table of Contents
I2C Bus#
GPIO Pin Usage#
Generally, port wires are orange or red, starboard are green (like on a boat).
| PIN | PIN |
|---|---|
| ... | ... |
| 10 | GND |
| 9 | 25 |
| 11: STATUS LED | 8: ENCODER A2 |
| NA | 7: ENCODER B2 |
| NA | NA |
| 5: STARBOARD INFRARED | GND |
| 6: CENTER INFRARED | 12: PORT INFRARED |
| 13: PORT BUMPER | GND |
| 19: CENTER BUMPER | 16 |
| 26: STARBOARD BUMPER | 20 |
| GND | 21 |
GPIO pin 20 is reserved for something, I can't remember.
(home page)