This page (revision-21) was last changed on 2021-11-10 04:19 by Murray Altheim

This page was created on 2020-05-10 03:58 by Murray Altheim

Only authorized users are allowed to rename pages.

Only authorized users are allowed to delete pages.

Page revision history

Version Date Modified Size Author Changes ... Change note
21 2021-11-10 04:19 7 KB Murray Altheim to previous

Page References

Incoming links Outgoing links
How To Configure A Static Ip Address
HowToConfigureAStaticIpAddress

Version management

Difference between version and

At line 21 changed 3 lines
inet6 fe80::6849:3b23:1365:745 prefixlen 64 scopeid 0x20<link>
inet6 fd48:3c0c:41d9:3100:b1b7:99fc:7136:b0f3 prefixlen 64 scopeid 0x0<global>
ether 16:8b:34:0f:08:6f txqueuelen 1000 (Ethernet)
inet6 fe80::6829:3b23:1365:745 prefixlen 64 scopeid 0x20<link>
inet6 fd48:3c0c:41c9:3100:b1b7:99fc:7136:b0f3 prefixlen 64 scopeid 0x0<global>
ether 16:8b:34:0e:08:6f txqueuelen 1000 (Ethernet)
At line 34 added 3 lines
%%information
One thing that has caught me out a few times: If you don't see an "inet6" line you have managed to disable ipv6. That doesn't mean you will see an "inet" line. If your local router has previously allocated an IP address then your attempt to assign your Pi that address will fail. You need to choose an address the router will permit you to use. The best way to do this is choose the address that your router has dynamically assigned that particular device, then make __that__ address static (as you know ''it can be assigned to that device'').
%%
At line 49 removed 2 lines
That on its own might work. Reboot to see. If you still see 'inet6' then continue with the following steps.
At line 59 changed one line
sudo nano /etc/sysctl.conf
% sudo nano /etc/sysctl.conf
At line 74 removed 3 lines
%%information
One thing that has caught me out a few times: If you don't see an "inet6" line you have successfully managed to disable ipv6. That doesn't mean you will see an "inet" line. If your local router has previously allocated an IP address then your attempt to assign your Pi that address will fail. You need to choose an address the router will permit you to use. The best way to do this is choose the address that your router has dynamically assigned that particular device, then make __that__ address static (as you know ''it can be assigned to that device'').
%%
At line 95 changed one line
sudo nano /etc/dhcpcd.conf
% sudo nano /etc/dhcpcd.conf
At line 101 changed 5 lines
~# set a static IP address for this Pi
interface wlan0
static ip_address=__192.168.1.74__/24
static routers=192.168.1.254
static domain_name_servers=192.168.1.254
# set a static IP address for this Pi
interface wlan0
static ip_address=__192.168.1.74__/24
static routers=192.168.1.254
static domain_name_servers=192.168.1.254
At line 108 removed one line
After modifying the file you'll need to reboot for the changes to take effect.
At line 118 removed one line
* [How to Directly Connect to a Raspberry Pi Without Internet|https://www.makeuseof.com/tag/directly-connect-raspberry-pi-without-internet/amp/]
This page (revision-21) was last changed on 2021-11-10 04:19 by Murray AltheimTop