%%alias Aliased from [Robot Platforms] %%

This is a page devoted to __robotic hardware platforms__, i.e., possible chassis and [control|Controller] prototypes for a low-cost, entry-level robot:

!! Chassis

* OSEPP
** Tank Kit
* __Adafruit__:
** Adafruit CRICKIT for [Circuit Playground Express]
** Purple Aluminum Chassis for TT Motors - 2WD
** Mini Robot Rover Chassis Kit - 2WD with DC Motors
** Mini Round Robot Chassis Kit - 2WD with DC Motors
** Mini 3-Layer Round Robot Chassis Kit - 2WD with DC Motors
* [BBC Micro:Bit based robots|BbcMicroBit]

See also: [Robot Prototypes], e.g., [KR01], [KC01] and [KRZ01]

! Instructables Rover

From a message on 2020-09-08 by Doug Paradis to the DPRG mailing list:
%%blockquote
[Instructables|https://www.instructables.com/] sometimes drops a "pearl before swine" article that is 
well worth the read. Author GregF10 has written a series of four 
Instructables that describe an indoor rover using a [Rpi|RaspberryPi] and Pololu 
A-star 32U4 microcontroller. Main sensors are an [IMU] (mostly gyro) 
and a LidarLite v3. The articles are organized by: overview, locomotion, 
localization, and navigation. 

The navigation article has a really interesting discussion about the 
use of the LiDAR sensor. The articles are well written and worth your 
time to investigate. 
 
Regards,Doug P.

 __Links:__ 
* [https://www.instructables.com/id/Autonomous-Rover-Part-1/|https://www.instructables.com/id/Autonomous-Rover-Part-1/] 
* [https://www.instructables.com/id/Autonomous-Rover-Part-2-Locomotion/|https://www.instructables.com/id/Autonomous-Rover-Part-2-Locomotion/] 
* [https://www.instructables.com/id/Autonomous-Rover-Part-3-Localization/|https://www.instructables.com/id/Autonomous-Rover-Part-3-Localization/]  
* [https://www.instructables.com/id/Autonomous-Rover-Part-4-Navigation/|https://www.instructables.com/id/Autonomous-Rover-Part-4-Navigation/] 
%%

----

[{Tag Hardware}]