This page contains some miscellaneous notes about wiring on the [KR01] robot.
[{TableOfContents}]
!! I2C Bus
{{{
► i2cdetect -y 1
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- 14 15 -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- 28 -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- 68 -- -- -- -- -- -- --
70: -- -- -- -- 74 75 -- 77
}}}
!! GPIO Pin Usage
Generally, port wires are orange or red, starboard are green (like on a boat).
%%small
|| PIN || PIN
| ... | ...
| __10__ | GND
| __9__ | __25__
| __11__: STATUS LED | __8__: ENCODER A2
| NA | __7__: ENCODER B2
| NA | NA
| __5__: STARBOARD INFRARED | GND
| __6__: CENTER INFRARED | __12__: PORT INFRARED
| __13__: PORT BUMPER | GND
| __19__: CENTER BUMPER | 16
| __26__: STARBOARD BUMPER | 20
| GND | 21
%%
GPIO pin 20 is reserved for something, I can't remember.
{{{
► pinout
,--------------------------------.
| oooooooooooooooooooo J8 +====
| 1ooooooooooooooooooo | USB
| +====
| Pi Model 3B V1.2 |
| +----+ +====
| |D| |SoC | | USB
| |S| | | +====
| |I| +----+ |
| |C| +======
| |S| | Net
| pwr |HDMI| |I||A| +======
`-| |--------| |----|V|-------'
Revision : a02082
SoC : BCM2837
RAM : 1024Mb
Storage : MicroSD
USB ports : 4 (excluding power)
Ethernet ports : 1
Wi-fi : True
Bluetooth : True
Camera ports (CSI) : 1
Display ports (DSI): 1
J8:
3V3 (1) (2) 5V
GPIO2 (3) (4) 5V
GPIO3 (5) (6) GND
GPIO4 (7) (8) GPIO14
GND (9) (10) GPIO15
GPIO17 (11) (12) GPIO18
GPIO27 (13) (14) GND
GPIO22 (15) (16) GPIO23
3V3 (17) (18) GPIO24
GPIO10 (19) (20) GND
GPIO9 (21) (22) GPIO25
GPIO11 (23) (24) GPIO8
GND (25) (26) GPIO7
GPIO0 (27) (28) GPIO1
GPIO5 (29) (30) GND
GPIO6 (31) (32) GPIO12
GPIO13 (33) (34) GND
GPIO19 (35) (36) GPIO16
GPIO26 (37) (38) GPIO20
GND (39) (40) GPIO21
For further information, please refer to https://pinout.xyz/
}}}
!! Port-Front Board (with BNO05 DoF and [ItsyBitsy M4 Express])
5 pin header:
{{{
5V SCL SDA NA GND
}}}
----
[{Tag KR01}]