This page contains some miscellaneous notes about wiring on the [KR01] robot.

[{TableOfContents}]

!! I2C Bus



!! GPIO Pin Usage

Generally, port wires are orange or red, starboard are green (like on a boat).

%%small
|| PIN                        || PIN
| ...                         | ...
| __10__                      | GND
| __9__                       | __25__
| __11__: STATUS LED          | __8__: ENCODER A2
| NA                          | __7__: ENCODER B2
| NA                          | NA
| __5__: STARBOARD INFRARED   | GND
| __6__: CENTER INFRARED      | __12__: PORT INFRARED
| __13__: PORT BUMPER         | GND
| __19__: CENTER BUMPER       | 16
| __26__: STARBOARD BUMPER    | 20
| GND                         | 21
%%
 


GPIO pin 20 is reserved for something, I can't remember. 

----

[{Tag KR01}]