This page contains some information about the [Adafruit 320x240 2.8" TFT Display + Resistive Touchscreen|https://www.adafruit.com/product/2298].

There's also an [Adafruit 2.0" 320x240 TFT with no touchscreen|https://www.adafruit.com/product/4311], which is what is currently used on the [KR01] robot.

This has all 40 pins [GPIO] pins brought out so you can connect a 40-pin GPIO cable underneath.

It uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as [GPIO] #25 and #24. All other GPIO are unused. 

Since we had a tiny bit of space, there's 4 slim tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on/off button.

! Pimoroni Display HAT Mini

This is a 320x240 ST7789 based display as well, but it doesn't seem to be by default set up as a console. I've been
led by a Pimoroni Forum member to [https://github.com/juj/fbcp-ili9341] as a possible solution.


----

[{Tag Hardware}]